Microfluidics-Based Separations Technology for the Analytical Laboratory

HPLC, UHPLC

Microfluidics-Based Separations Technology for the Analytical Laboratory

27 Sep, 2011

Published over 14 years ago. See the latest and most current information on HPLC, UHPLC.

Geoff Gerhardt, Ph.D
1 min read
Download

A seminal paper was written by Manz et al.

(1) identifying the use of possibilities of using ‘chip based technology’ within an analytical instrument. When did you as a scientist first think that ‘chip technology’ could be a useful addition to analytical instrument design and separation science

in particular?

In the early 1990’s we saw a lot of enthusiasm for the “Lab-on-a-Chip” concept. And at the time, the concept of integrating multiple laboratory processes like sample prep, cell lysing, digestion, separation and detection onto a single microfluidic device looked technically possible.

However, as researchers began to develop these microfluidic systems, integrating these various functions onto a single device proved difficult. Each lab process used different technologies, such as sample prep or digestion, compared to technology used for separation and detection. What started out as a single device became a hybridisation of a variety of technologies with a host of complex interfaces.

Latest Articles

Explore Our Other Sites

Labmate Online
Vitamin B3 shows promise as therapy for rare childhood neurodegenerative illness
Explore more Arrow
Envirotech Online
Delaware refinery's fenceline monitoring rollout tests forced transparency
Explore more Arrow
Pollution Solutions Online
Energy efficiency first: Why shipping must act now while low-GHG fuels scale
Explore more Arrow
Petro Online
Dr. Raj Shah receives NLGI Achievement Award, adding to a distinguished career in fuels, lubricants and petroleum testing
Explore more Arrow