Microfluidics-Based Separations Technology for the Analytical Laboratory

HPLC, UHPLC

Microfluidics-Based Separations Technology for the Analytical Laboratory

27 Sep, 2011

Published over 14 years ago. See the latest and most current information on HPLC, UHPLC.

Geoff Gerhardt, Ph.D
1 min read
Download

A seminal paper was written by Manz et al.

(1) identifying the use of possibilities of using ‘chip based technology’ within an analytical instrument. When did you as a scientist first think that ‘chip technology’ could be a useful addition to analytical instrument design and separation science

in particular?

In the early 1990’s we saw a lot of enthusiasm for the “Lab-on-a-Chip” concept. And at the time, the concept of integrating multiple laboratory processes like sample prep, cell lysing, digestion, separation and detection onto a single microfluidic device looked technically possible.

However, as researchers began to develop these microfluidic systems, integrating these various functions onto a single device proved difficult. Each lab process used different technologies, such as sample prep or digestion, compared to technology used for separation and detection. What started out as a single device became a hybridisation of a variety of technologies with a host of complex interfaces.

Explore Our Other Sites

Labmate Online
Digest mixed samples in a single run – Technology Report
Explore more Arrow
Envirotech Online
Rack-mountable FTIR gas analyser for integrated multi-gas analysis in fixed measurement systems
Explore more Arrow
Pollution Solutions Online
Queen’s University Belfast leads £2.9 million international project to combat Malaysia’s growing e-waste crisis
Explore more Arrow
Petro Online
Free webinar: enhancing accuracy and efficiency in renewable fuel laboratory testing
Explore more Arrow