Successful LC separations on pilot scale
Feb 23 2021
The aim of a LC separation on pilot scale is to purify as much product as possible in as short a time as possible as cheaply as possible. An optimum yield is achieved with a high column performance of the packed column. This requires the column bed to be packed efficiently and homogenously. Therefore, the selection of suitable column hardware is an essential aspect. Packing, qualifying, and operating as well as unpacking the column all take time and reflect in the overall process costs. Optimised column hardware offers possible savings by reducing the overall costs of the process.
During the design of the YMC PilotPLUS columns, YMC specifically focussed on the handling during the packing and unpacking steps. As a result, packing procedures can be improved and the efficiency can be increased.
Special requirements for the column hardware
Glass pilot columns such as the YMC PilotPLUS columns are mainly used for BioLC applications and packed with soft gels. This application area makes additional demands on the column hardware because compounds such as peptides, proteins, oligonucleotides or antibodies can have very complex three-dimensional structures, which can be distorted by metal ions. Therefore, metal free wetted parts of the hardware are essential.
With no metal present, the YMC PilotPLUS columns are the perfect match for BioLC applications. All wetted parts are in compliance with FDA, BES/TSE and USP Class VI regulations. Certification and full documentation are available for validation purposes.
Fast piston insertion without air bubbles
Pilot columns are most frequently packed by means of slurry packing methods. In this case, it is very important to initiate the packing process as quickly as possible. Therefore, the following steps need to be performed without delays.
- The gel needs to be transferred quickly into the column body without introduction of air.
- The piston needs to be inserted without delay, as the packing pressure needs to be applied as soon as possible.
During the slurry filling introduction of excessive air bubbles needs to be avoided. Therefore, filling has to be done carefully and slowly, but with minimum delay.
The YMC PilotPLUS columns are the solution for fast and bubble-free piston insertion. Through an inclined surface at the glass body and the drain function, the piston can be inserted into the solvent. Excessive solvent can flow away through the drain function. For prevention of air bubbles during pouring in the slurry, a special column filling tool is available.
In This Edition Modern & Practical Applications - Advancing Effective Glycan Analysis - Delivering the Power of Ion Mobility Spectrometry - Mass Spectrometry to the Point of Analysis - The...
View all digital editions
Jun 06 2021 Virtual event
Jun 21 2021 Dubai, UAE & Online
Jun 29 2021 Ljubljana, Slovenia
Aug 22 2021 Nijmegen, Netherlands
Aug 22 2021 Atlanta, GA, USA & Virtual